How to install and remove the battery

Installing the battery in Scooba
Rotate the battery into the slot and make sure the yellow battery clips are fully inserted in holes. You will hear a click when the battery is inserted correctly.

removing the battery

Take the battery, make sure to remove the clips of the tank and turn it up

.

Scooba’s Anatomy

Charging Battery

Charge Scooba's battery by plugging the power cord into Scooba. Align the arrow on the power with the arrow on Scooba.

Dirty tank

Scooba pours a cleaning, polishing carefully ground and retrieves all of the dirt in the tank provided for this purpose. Drain and rinse tanks after each cleaning cycle.

Scooba Maintenance

For Scooba can give its best results, simply perform the following maintenance after each cleaning cycle:
Rinse the dirt Scooba

Avoiding Common Mistakes

IRobot Scooba will not clean properly if the battery
the cleaning head, the filter or the suction port is not correctly
installed. You will find below some common mistakes that you
can easily avoid to ensure the best results.
Make sure the battery is properly installed
When the battery is properly installed, the clips are yellow
go perfectly in guide holes.

Clean the brush after each use Scooba.

Scooba brush is located in a cartridge called a "head
cleaning. "You access the cleaning head within Scooba,
you must open the tank to remove and replace the head
cleaning.